Various vehicle manufacturers already cooperate with HeavyGoods and provide digital vehicles for HeavyGoods, see Get digital vehicles from a manufacturer
If you have all the relevant data for a vehicle, you can also create it in HeavyGoods yourself.
The first step is to activate the axle load calculation for the semitrailer:
(Tip: If you press on the image, a readable enlargement appears).
Then select the axle load compensation of your vehicle:
With hydraulic axle load compensation, you must also set the number of axle lines in the front support circuit...
(Only for vehicles with hydraulic axle load compensation)
...and specify up to five different fifth wheel axle load ratios:
(Only for vehicles with hydraulic axle load compensation)
In the next step, you specify the technically permissible limits for fifth wheel load and axle load:
If your vehicle has hydraulic axle load compensation or air suspension, you also have the option of specifying the axle load pressure ratio. This information is optional.
Lastly, the empty weight and the center of gravity position of the vehicle is needed:
For single telescopic vehicles, two centers of gravity must be specified, one for the front part of the vehicle and one for the rear:
(Floating tubes are not currently supported).
You did it!
