Note: The automatic calculation/simulation is used for this maneuver. Currently it is not possible to simulate a turning maneuver using the guide line.
Place the vehicle combination (A and B) on the map. Pay attention to the position of the tractor B (against the driving direction).
Define a drivable area including space for the turning maneuver. This should be as large as necessary and as small as possible. Make sure that the tires of vehicles A and B are in the green area.
Add obstacles if necessary.
To define the final position of the vehicle, an obstacle can be created around the vehicle. This serves as a "parking space".
Starting position:
Now start the simulation.
Result of the calculation in images:
Did you know? - In HeavyGoods, you can also simulate a backwards maneuver.
